Iron-on Patch Instructions
Step 1
Remove the small, white sticky square sticker from patch and discard before ironing (this was used to affix patch to the Ashdel backing card).
Preheat the iron to the cotton setting (hot). Ensure steam setting is turned off.
Step 2
Position patch where you'd like it. Cover it with a thin cotton cloth, like a T-shirt or thin towel.
Note: If using the patch to cover a small hole or tear in fabric, place a small piece of cloth or a paper towel on the interior side so that the adhesive from the patch doesn't stick to the surface beneath.
Step 3
Iron the patch including all the edges for about 15-20 seconds, or until the adhesive fuses to the fabric. Let cool for 5-10 seconds, then gently look to see if all edges are secured. Repeat with iron if necessary.
Step 4
